Open EPS files with GIMP for Windows

To open EPS files on GIMP for Windows, you'll need to install GhostScript. You can download GhostScript here. After installing, you'll also need to configure a system environment variable: GS_PROG. This variable must point to the executable, in my case C:\Program Files\gs\gs9.05\bin\gswin32.exe.

Setting the environment variable is done in the advanced settings of "my computer".

© GeekLabInfo Open EPS files with GIMP for Windows is a post from GeekLab.info. You are free to copy materials from GeekLab.info, but you are required to link back to http://www.geeklab.info

1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)
Loading...

Setting up a PPTP VPN to a Windows 2008 Server

Requirements

Linux
KDE
A Windows server to connect to.

Step 1: Install required software

yum install kde-plasma-networkmanagement-pptp NetworkManager-pptp

Step 2: Configure the network

In the KDE Network Manager plasma module, go to the tab VPN, click add and choose PPTP.

Enter and connection name you like. In the field "gateway" type the hostname or IP number of the Windows server you're connecting to. Under Login, Password and NT Domain, fill in your authentication data. Then click advanced.

In the advanced window, disable EAP and enable MPPE. Then click OK.

Go to the tab IPv4. Under method, I chose Automatic (VPN). But Automatic (VPN) addresses only is also a nice option: it sets the IPs but no DNS settings.

Go to the routes sub-tab. Switch on Ignore automatically obtained routes and Use only for resources on this connection to make sure the connection doesn't steal your traffic. Then I entered a manual route: 192.168.178.0/255.255.255.0 to gateway 0.0.0.0 (it is a ppp device after all).

You may want to configure IPv6 as well, but I don't at this moment, so I'm not documenting this.

Step 3: Connect

Click on the icon in the tray and connect.

Ubuntu/Debian

I'm running RedHat-based software on all of my machines. Above information may be useful for Ubuntu/Debian users, but it's not tested and I'm not supporting it.

Servers: RedHat Enterprise Linux/CentOS is more suitable for servers, as there's a lot of professional level support available. I think that's important, because if I say, get a car accident, I want the servers to be managable by another professional.

Desktops/Laptops: RPM packages are pretty exchangable between RedHat-based platforms. That's a good reason to run Fedora on the desktop.
© GeekLabInfo Setting up a PPTP VPN to a Windows 2008 Server is a post from GeekLab.info. You are free to copy materials from GeekLab.info, but you are required to link back to http://www.geeklab.info

1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Squid with active directory authentication on Centos 6.0

In this post, I'll be writing down all steps required to build a Squid proxy server on a clean "minimal" installation of CentOS 6.0

Step 1. Network configuration

First, install system-config-network or manually configure the network. I prefer system-config-network for easy configurations and vim for more complex configurations.
yum -y install system-config-network-tui

Step 2. Install some tools for convenience

yum -y install vim-minimal vim-enhanced openssh-clients mc telnet policycoreutils policycoreutils-python bind-utils

Step 3. Install ntp and synchronize clocks

If one of the clocks it out of sync, NTLM authentication will not work. Therefore, we synchronize the clocks. Using pool.ntp.org as a source would be good, but if the AD server isn't synchronized with that source, we'd have the same problem. So I'm synchonizing the proxy to the AD server (Win2003SBS actually) instead:
rpm -q ntp || yum -y install ntp
sed -i "s/^server /#server /g" /etc/ntp.conf
echo "server AD-SERVERNAME" >> /etc/ntp.conf
ntpdate AD-SERVERNAME #synchronize right now
service ntpd start #and keep in sync
chkconfig ntpd on

Step 4. Install squid and other required software

yum -y install krb5-workstation samba-common samba-winbind authconfig squid
chkconfig squid on

Step 5. Connect to active directory

Please note that MYCOMPANY.local and mycompany.local may be different domains due to the upper/lowercase.
ADSERVER=sbs.MYCOMPANY.local
DOMAIN=MYCOMPANY.local
WORKGROUP=MYCOMPANY
authconfig --enableshadow --enablemd5 --passalgo=md5 --krb5kdc=$ADSERVER \
--krb5realm=$DOMAIN --smbservers=$ADSERVER --smbworkgroup=$WORKGROUP \
--enablewinbind --enablewinbindauth --smbsecurity=ads --smbrealm=$DOMAIN \
--smbidmapuid="16777216-33554431" --smbidmapgid="16777216-33554431" --winbindseparator="+" \
--winbindtemplateshell="/bin/false" --enablewinbindusedefaultdomain --disablewinbindoffline \
--winbindjoin=Administrator --disablewins --disablecache --enablelocauthorize --updateall
service winbind restart
chkconfig winbind on

Give squid permissions to use winbind info:
usermod -G wbpriv squid

Now check your winbind connection using the following commands:
wbinfo -u
wbinfo -g

Step 6. Firewall

iptables -I INPUT -m tcp -p tcp --dport 3128 -j ACCEPT
/sbin/service iptables save

Step 7. Configure squid

I commented out this line from /etc/squid/squid.conf:
http_access allow localnet
That line would have allowed users from 10.0.0.0/8+172.16.0.0/12+192.168.0.0/16 and others to use the proxy without authentication. Then I added the following right below that line:
acl whitelist dstdom_regex -i "/etc/squid/whitelist"
http_access allow whitelist
auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
auth_param ntlm children 5
auth_param ntlm keep_alive on
acl our_networks src 192.168.0.0/16
acl ntlm proxy_auth REQUIRED
http_access allow our_networks ntlm
authenticate_ip_ttl 900 seconds

This will allow all valid, logged in users to surf the web. You could also limit which users can surf by adding --require-membership-of=ADGROUPNAME to the ntlm_auth command

The first two lines of above configuration point to a file /etc/squid/whitelist. This file contains domains that should never be denied. My whitelist file contains:
\.trendmicro\.com
^trendmicro\.com
\.microsoft\.com
^microsoft\.com

This means that anything at *.microsoft.com and microsoft.com (without subdomain) as well as *.trendmicro.com as trendmicro.com (my virusscanner) is always allowed for any user. We wouldn't want to block important updates.

Start Squid using /sbin/service squid restart and the proxy is ready.

Step 8. Optional: IPv6 issues

I've been experimenting with IPv6 for a while now, but I don't have IPv6 available on all systems. That caused me some trouble with the next step. I had to give preference to IPv4 above IPv6 by editting /etc/gai.conf:
label ::1/128 0
label ::/0 1
label 2002::/16 2
label ::/96 3
label ::ffff:0:0/96 4
label fec0::/10 5
label fc00::/7 6
precedence ::ffff:0:0/96 100
precedence ::1/128 50
precedence ::/0 40
precedence 2002::/16 30
precedence ::/96 20

Step 9. Optional: Some white- and blacklisting

We may not want to allow all sites to be visited. For instance, porn sites are often blocked in office situations. I've got a manual on blacklisting using SquidGuard as well.

© GeekLabInfo Squid with active directory authentication on Centos 6.0 is a post from GeekLab.info. You are free to copy materials from GeekLab.info, but you are required to link back to http://www.geeklab.info

1 Star2 Stars3 Stars4 Stars5 Stars (2 votes, average: 5.00 out of 5)
Loading...

Konsole is hiding underscores

Today I upgraded my Fedora 15 installation to Fedora 16 with KDE 4.7.4. Although it was a pretty smooth transition this time, there were a few problems. One of them was that Konsole 4.7.4-2.fc16 was hiding underscores, which is pretty annoying when you're programming.

How the hell are you supposed to code when half of the characters is invisible?

I'm more than happy to report that I fixed it. On the profile's page "advanced" you find the option "Enable Bi-Directional text rendering". Enabling this option fixed the problem immediately.

Google'ing, I found a few pages that say this is specific to a combination of intel or nouveau driver + specific fonts + Qt 4.8.

Update: RedHat acknowledged the issue and released a fix: konsole 4.7.4-2.fc16. Update using yum update konsole

© GeekLabInfo Konsole is hiding underscores is a post from GeekLab.info. You are free to copy materials from GeekLab.info, but you are required to link back to http://www.geeklab.info

1 Star2 Stars3 Stars4 Stars5 Stars (2 votes, average: 4.00 out of 5)
Loading...

MS Paint: Insufficient memory

One of my users got an annoying message when starting MS Paint (mspaint.exe):

Onvoldoende geheugen of bronnen om de bewerking te voltooien. Sluit enkele programma's af en probeer het opnieuw.

Which means:

Insufficient memory to complete operation. Close some programs and try again

Other resources suggested that the file opened was too big or that we're doing something with a .tiff file. But he was just starting paint, no images involved at that point. The solution was to open regedit and remove the following key:
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Paint
That reset all MS Paint settings and we could start paint again.

© GeekLabInfo MS Paint: Insufficient memory is a post from GeekLab.info. You are free to copy materials from GeekLab.info, but you are required to link back to http://www.geeklab.info

1 Star2 Stars3 Stars4 Stars5 Stars (2 votes, average: 3.00 out of 5)
Loading...

SGS2: OpenVPN

I'm currently running CF-Root kernel version CF-Root-SGS2_XW_XEN_KK2-v5.0-CWM5.

I installed the following packages:
https://market.android.com/details?id=de.schaeuffelhut.android.openvpn.installer
https://market.android.com/details?id=de.schaeuffelhut.android.openvpn

Then I discovered that the openvpn binary was not completely okay, especially the ifconfig parameter gave some unexpected errors on correct configurations. So I downloaded this file (mirror), unzipped it, and put it on the location of the original openvpn binary.

mount /system -o remount,rw
cd /system/xbin
ln -s /system/bin/toolbox  ifconfig
ln -s /system/bin/toolbox  route
mv openvpn openvpn-original
mv /path/to/new/openvpn openvpn
mount /system -o remount,ro

And it works great!

© GeekLabInfo SGS2: OpenVPN is a post from GeekLab.info. You are free to copy materials from GeekLab.info, but you are required to link back to http://www.geeklab.info

1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)
Loading...

DNS and multiple VPNs: Using dnsmasq to access multiple dns suffixes

On my Fedora 15 laptop, I'm almost always connected to several VPNs simultaneously. One VPN to my office or to my home (depending on where I am), one to the data center, one to a customer. These connections all have their own DNS server with their own suffix.

To make all dns suffixes working, I created a script that redirects all outgoing DNS traffic to dnsmasq running on localhost, which in turn forwards all requests for .lan to 192.168.15.254 and all requests for .gl to 192.168.1.254.

The script was put in /etc/NetworkManager/dispatcher.d/10-DNS:

if [ -e /var/run/dnsmasq.localhost ]; then
        cat /proc/`cat /var/run/dnsmasq.localhost`/cmdline |grep dnsmasq >/dev/null 2>/dev/null && \
        kill `cat /var/run/dnsmasq.localhost`
fi
 
if [ "$2" == "up" ]; then
        cp /etc/resolv.conf /etc/resolv.conf.dhcp
        echo nameserver 127.0.0.1 >  /etc/resolv.conf
        echo domain $DHCP4_DOMAIN_NAME >> /etc/resolv.conf 
        echo search $DHCP4_DOMAIN_NAME >> /etc/resolv.conf 
        /usr/sbin/dnsmasq -C /dev/null -r /etc/resolv.conf.dhcp --server=/gl/192.168.1.254 \
            --server=/lan/192.168.15.254 --bind-interfaces --listen-address 127.0.0.1 \ 
            --pid-file=/var/run/dnsmasq.localhost
fi

Once I had to fix resolv.conf manually when I connected my laptop to my Samsung Galaxy SII as well. This may mean I need to improve the script some day, but for the time being, it works good enough.

© GeekLabInfo DNS and multiple VPNs: Using dnsmasq to access multiple dns suffixes is a post from GeekLab.info. You are free to copy materials from GeekLab.info, but you are required to link back to http://www.geeklab.info

1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)
Loading...